In high-temperature weather, the condensing environment directly impacts the cooling efficiency within a facility. While many factories focus on the temperature of the air supplied indoors, they often overlook the operating environment of the outdoor units. In regions with prolonged high temperatures, the heat dissipation conditions for these outdoor units significantly affect the entire system's performance: higher ambient temperatures and poorer heat exchange conditions on the condensing side typically place greater strain on the refrigeration system.
This issue is particularly critical for factories located in Southeast Asia, South Asia, and the Middle East. If outdoor units are clustered in confined spaces-or exposed to heat exhausted from other equipment or the recirculation of hot air-the actual intake air temperature can exceed the local ambient temperature. Under these conditions, even if the indoor cooling load remains constant, the system's energy consumption will likely increase due to the high-temperature environment. Therefore, when developing cooling solutions for large-scale facilities, the placement of outdoor units should not merely be a matter of "finding a spot"; it must also account for adequate ventilation, the path for hot air exhaust, and future access for cleaning heat exchange components.

For certain high-temperature operating conditions, the system can be optimized by reducing the heat exchange burden on the condensing side. For instance, the hybrid approach used by DONCO-combining evaporative pre-cooling with mechanical (compression-based) refrigeration-pre-treats the air before it reaches the condenser, thereby improving condensing conditions in hot environments. The specific energy-saving benefits should be evaluated based on local temperature and humidity levels, water quality, operating hours, and actual cooling loads.
Consequently, determining whether an industrial air conditioning system is suitable for a hot region should not rely solely on its nominal cooling capacity. Factors such as the outdoor design temperature, the environment for condensing heat dissipation, and long-term maintenance requirements should all be considered during the initial equipment selection phase.

